Product Description
Gospel Boat- 6m hot sale Easy Craft
Combination of deep V hull and Pontoon hull is the most special design for this boat, guarantees a good performance on both breaking waves and stability. So when you drive on the sea, it is safe, stable and comfortable.
Standard layout as below:
1) At front, it is a rest area with soft cushion
2) In the cabin, there are two captain seats
3) Deck area for fishing, with rod holders on hard top and in gunwale
4) Rear folding seats, cutting bait board and live bait tank
Detailed images
Rest area at front
2 Captain seats in cabin with storage bottom
Deck area for fishing
Rear folding seats ,live bait tank, engine pod and rear ladder
| SPECIFICATIONS |
| Length Maximum(m) |
6.25 |
| Length of the hull(m) |
6 |
| Beam (m) |
2.25 |
| Depth(m) |
1.1 |
| Hull Thickness(mm) |
5 |
| Tube Thickness(mm) |
3 |
| Transom Shaft(Single engine) |
25' |
| Transom Shaft(Twin engine) |
x |
| Dry weight(kgs) |
980 |
| Min. HP |
115 |
| MAX. HP |
175 |
| Person capacity(Max) |
6 |
| Warranty : |
5 years |
| Boat hull and deck |
| Fuel tank (L) |
150 |
| Live Bait Tank with rod holders(L) |
40 |
| Cutting board |
√ |
| Alloy Fairlead and Roller |
√ |
| Cleats |
√ |
| Anchor well |
√ |
| Battery switch |
√ |
| Battery and oil tank shelf/compartment |
√ |
| Seat rear fold down*2 |
√ |
| Ladder |
√ |
| Gunwale anti-slip pad |
√ |
| Self-draining system |
X |
| Bilge pump |
√ |
| Water tight pontoons |
√ |
| Foam filled in pontoons |
√ |
| Side Pontoon Storage Trays |
√ |
| Rod Holders on the gunwale |
√ |
| Rocket Launchers on hardtop |
√ |
| Bow and stern handrails |
√ |
| Handrails on the hardtop |
√ |
| Rear cabin handrails |
√ |
| Nav. and Mast lights |
√ |
| Transducer Mount Bracket |
√ |
| Center console |
X |
| Painting(two tone) |
√ |
| Cabin |
| Marine driver seat |
√ |
| Nav.seat |
√ |
| LED Cabin light |
√ |
| Sliding window |
√ |
| Electric wiper |
√ |
| Switch control Panel |
√ |
| Cushions |
√ |
| Offshore hatch |
X |
| Cabin door |
X |
| Folding table |
X |
| Under floor storage tank |
X |
Our Advantages
WHY CHOOSE US
A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.
Package and delivery
the boat is fixed on a frame, protected by foam, then load into 40ft HQ.
No matter 1pc or 2pcs, both need one 40ft HQ to ship.
Why you should select our boats
Our workshops
Welding workshop
Outfitting workshops
If you are looking for a fishing boat, welcome to contact with me.We have different designs and different sizes available. I will promise you a satisfied boat!
){kind=link}