CE Certificated Aluminium Boat 6.25m Cabin Cruiser Aluminum Marine Fishing Boat

• Inflatable: Not Inflatable
• Color: Grey
• Folded: Unfolded
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: E600
• Seater: 4
• Hull Material: Marine Grade Aluminum
• Motor Type: Outboard Engine
• Power Range: 115-175HP
• Warranty: 3 Years
• Beam: 2.25m
• Painting: 2 Tone
• Certificaction: CE
• Transport Package: Packed with Plastic Foam
• Specification: Length of Hull 6.20m
• Trademark: OEM available
• Origin: China
• HS Code: 8903990090
• Production Capacity: 500 Units Per Year

Product Description

                                            New design Easycraft 6.2m/21ft small aluminum fishing boats with pontoon hull

*Pontoon hull stracture filled with foams: increase the safety and floatage, reduce the noice while driving 
*Deep V hull design, easily break the wave and soft entrence into the headsea.
*Fully-welded checkerplate deck is easy to clean. 
*Multiple painting colors are available
*Gorgeous boat outline and cool to drive cruising with. 
*Luxury cabin with confort seat and soft benchs. 
*Cozy bunks for resting, also with storage pockets aside.  
 

Detailed Photos

     

Strong and firm cleat


Hydraulic steering system is available 

Product Parameters

 

SPECIFICATIONS
Length Maximum(m)	6.25
Length of the hull(m)	6
Beam (m)	2.25
Depth(m)	1.1
Hull Thickness(mm)	5
Tube Thickness(mm)	3
Transom Shaft(Single engine)	25'
Transom Shaft(Twin engine)	x
Dry weight(kgs)	980
Min. HP	115
MAX. HP	175
Person capacity(Max)	6
Warranty :	5 years
Boat hull and deck
Fuel tank (L)	150
Live Bait Tank with rod holders(L)	40
Cutting board	√
Alloy Fairlead and Roller	√
Cleats	√
Anchor well	√
Battery switch	√
Battery and oil tank shelf/compartment	√
Seat rear fold down*2	√
Ladder	√
Gunwale anti-slip pad	√
Self-draining system	X
Bilge pump	√
Water tight pontoons	√
Foam filled in pontoons	√
Side Pontoon Storage Trays	√
Rod Holders on the gunwale	√
Rocket Launchers on hardtop	√
Bow and stern handrails	√
Handrails on the hardtop	√
Rear cabin handrails	√
Nav. and Mast lights	√
Transducer Mount Bracket	√
Center console	X
Painting(two tone)	√
Cabin
Marine driver seat	√
Nav.seat	√
LED Cabin light	√
Sliding window	√
Electric wiper	√
Switch control Panel	√
Cushions	√
Offshore hatch	X
Cabin door	X
Folding table	X
Under floor storage tank	X

Our Advantages

WHY CHOOSE US
A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.

 

Production Process

 

Company Profile

 

 

 

 

Certifications

 

 

FAQ

1. Do you support OEM service?

A: Yes we support OEM service, and we can produce by your samples or technical drawing.

2. What is your terms of packing?

A: Genrally we pack our products in waterproof material and then put in container.

3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF.

4. How about your delivery time?

A: Generally, it will take 45 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

5. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

6. Do you test all your goods before delivery?

A: Yes, every boat is inspected strictly through the whole production, by 3 different persons at least from design team, production team and sales team.